master instrument corporation single-phase bridge rectifier w005mf thru w10mf voltage range current 50 to 1000 volts 1.5 amperes e-mail: sales@cnmic.com web site: www.cnmic.com 1/2 features l low cost l this series is ul recognized under component index,file number e127707 l high forward surge current capability l ideal for printed circuit board l high temperature soldering guaranteed: 260 o c/10 second, at 5 lbs. (2.3kg) tension. mechanical data l case: molded plastic body l terminal: lead solderable per mil-std-202e method 208c. l polarity: polarity symbols molded on case l mounting position: any l weight:0.042ounce,1.2grams ~ ~ - + 1.1 (27.9) min .366(9.3) .350(8.9) .220(5.6) .200(5.1) 1.0 (25.4) min .032(0.8)dia .028(0.7)typ .220(5.6) .180(4.6) .220(5.6) .180(4.6) pos lead dimensions in inches and (millimeters) maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load derate current by 20%. symbols w005mf w01mf w02mf W04MF w06mf w08mf w10mf units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified output current, at t a =25 (note1) i (av) 1.5 amps peak forward surge current 8.3ms single half sine- wave superimposed on rated load (jedec method) i fsm 50 amps ratings for fusing (t<8.3ms) i 2 t 10 a 2 s maximum instantaneous forward voltage at 1.0a v f 1.3 volts t a =25 5.0 10 m amps maximum dc reverse current at rated dc blocking voltage per element t a =100 i r 0.5 mamps typical junction capacitance(note2) c j 25 p f maximum reverse recovery time (note 3) t j =25 t rr 150 250 500 ns operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 notes: 1. unit mounted on p.c. board with 0.22 0.22 (5.5 5.5mm)copper pads,0.375 (9.5mm)lead length. 2. measured at 1.0mhz and applied reverse voltage of 4.0 volts. 3. reverse recovery test conditions: i f =0.5a, i r =1.0a, i rr =0.25a
master instrument corporation single-phase bridge rectifier w005mf thru w10mf voltage range current 50 to 1000 volts 1.5 amperes e-mail: sales@cnmic.com web site: www.cnmic.com 2/2
|
